Wholesaler & Retailer for Renewable Energy in Thailand and Asia

ANTARIS 2.5 kW Wind Turbine Grid Connected

- For locations exposed to storm-force winds, optionally with different rotor diameters (2.35 – 3.00 m).

- Low noise blade tip profile

- Grid connected, Heating system and Battery charging

- Storm protection with Helicopter position and electronic brake

- Easy to install

Information about ANTARIS Wind Energy System

The ANTARIS wind turbine is a wind energy system that is ideally suited to inland sites. It is designed specifically for feeding power into the grid, charging batteries (24 VDC / 48 VDC etc.)
and for supporting heating systems.

As a result of its sturdy design, the ANTARIS is also suitable for locations exposed to storm-force winds, optionally with different rotor diameters (2.35 – 3.00m).

The hand-laminated rotor blades benefit from a computer-designed aerodynamic profile. Needless to say, each blade is statically and dynamically balanced, carries an identification number and comes with relevant documentation.

Uncomplicated from the aspect of configuration, importance has been attached to ensuring that these turbines can be quickly assembled and installed by hand. As a result of its robust design, the ANTARIS works with extreme efficiency and not only comes at a highly attractive price in its basic version. Particular attention must be drawn to its excellent start-up behaviour (at wind speeds as low as 2.28 m/s) and very quiet operation (43 dB). This means the system can also be installed in residential areas.

Grid-connected operation requires one inverter (Power One 2.5) with characteristics matched to the ANTARIS and local wind conditions. Alternatively, in less windy areas, grid-connected operation is also possible with a Power One 1.6.

The inverters carry an appropriate declaration of conformity and are approved for grid-connected operation – the ENS (electronic grid guard system) is already integrated!

When the ANTARIS is used in heating applications, a control cabinet with control electronics provides optimum control of the wind characteristic in conjunction with a 6000-watt heating element.

Standard Norms and Certifications:

CE-DIN EN 60204-1
DIN VDE 0113 T 1
DIN EN 12100
DIN EN 418
Accident prevent regulation
BGV A3 (VBG4) According to IEC 61400-2

Read more ...

- For locations exposed to storm-force winds, optionally with different rotor diameters (3.00 – 3.50m).
- Low noise blade tip profile

- Grid connected, Heating system and
Battery charging

- Storm protection with Helicopter position and electronic brake

- Easy to install

Information about ANTARIS Wind Energy System

The ANTARIS wind turbine is a wind energy system that is ideally suited to inland sites. It is designed specifically for feeding power into the grid, charging batteries (24 VDC / 48 VDC etc.)
and for supporting heating systems.

As a result of its sturdy design, the ANTARIS is also suitable for locations exposed to storm-force winds, optionally with different rotor diameters (3.00 – 3.50m).

The hand-laminated rotor blades benefit from a computer-designed aerodynamic profile. Needless to say, each blade is statically and dynamically balanced, carries an identification number and comes with relevant documentation.

Uncomplicated from the aspect of configuration, importance has been attached to ensuring that these turbines can be quickly assembled and installed by hand. As a result of its robust design, the ANTARIS works with extreme efficiency and not only comes at a highly attractive price in its basic version. Particular attention must be drawn to its excellent start-up behaviour (at wind speeds as low as 2.2 m/s) and very quiet operation (43 dB). This means the system can also be installed in residential areas.

Grid-connected operation requires one inverter Aurora 3.6 with characteristics matched to the ANTARIS and local wind conditions. Alternatively, in less windy areas, grid-connected operation is also possible with an Aurora 2.0.

The inverters carry an appropriate declaration of conformity and are approved for grid-connected operation – the ENS (electronic grid guard system) is already integrated!

When the ANTARIS is used in heating applications, a control cabinet with control electronics provides optimum control of the wind characteristic in conjunction with a 6000-watt heating element.

Standard Norms and Certifications:

CE-DIN EN 60204-1

DIN VDE 0113T 1

DIN EN 12100

DIN EN 418

Accidentprevent regulation BGVA3

(VBG4)

According toIEC61400-2

Read more ...

- For locations exposed to storm-force winds, optionally with different rotor diameters (3.50 – 4.00m).

- Low noise blade tip profile

- Grid connected, Heating system and
Battery charging

- Storm protection with Helicopter position and electronic brake

- Easy to install

Information about ANTARIS Wind Energy System

The ANTARIS wind turbine is a wind energy system that is ideally suited to inland sites. It is designed specifically for feeding power into the grid, charging batteries (24 VDC / 48 VDC etc.)
and for supporting heating systems.

As a result of its sturdy design, the ANTARIS is also suitable for locations exposed to storm-force winds, optionally with different rotor diameters (3.50 – 4.00m).

The hand-laminated rotor blades benefit from a computer-designed aerodynamic profile. Needless to say, each blade is statically and dynamically balanced, carries an identification number and comes with relevant documentation.

Uncomplicated from the aspect of configuration, importance has been attached to ensuring that these turbines can be quickly assembled and installed by hand. As a result of its robust design, the ANTARIS works with extreme efficiency and not only comes at a highly attractive price in its basic version. Particular attention must be drawn to its excellent start-up behaviour (at wind speeds as low as 2.8 m/s) and very quiet operation (43 dB). This means the system can also be installed in residential areas.

Grid-connected operation requires one inverter Smart!wind 5.5 with characteristics matched to the ANTARIS and local wind conditions. Alternatively, in less windy areas, grid-connected operation is also possible with an Aurora 2.5.

The inverters carry an appropriate declaration of conformity and are approved for grid-connected operation – the ENS (electronic grid guard system) is already integrated!

When the ANTARIS is used in heating applications, a control cabinet with control electronics provides optimum control of the wind characteristic in conjunction with a 6000-watt heating element.

Standard Norms and Certifications:

CE-DIN EN 60204-1

DIN VDE 0113T 1

DIN EN 12100

DIN EN 418

Accidentprevent regulation BGVA3 (VBG4)

According toIEC61400-2

Read more ...

- For locations exposed to storm-force winds, optionally with different rotor diameters (4.00 m – 5.30 m).

- Low noise blade tip profile

- Grid connected, Heating system and
Battery charging

- Storm protection with Helicopter position and electronic brake

- Easy to install

Information about ANTARIS Wind Energy System

The ANTARIS wind turbine is a wind energy system that is ideally suited to inland sites. It is designed specifically for feeding power into the grid, charging batteries (24 VDC / 48 VDC etc.)
and for supporting heating systems.

As a result of its sturdy design, the ANTARIS is also suitable for locations exposed to storm-force winds, optionally with different rotor diameters (4.00 m – 5.30 m).

The hand-laminated rotor blades benefit from a computer-designed aerodynamic profile. Needless to say, each blade is statically and dynamically balanced, carries an identification number and comes with relevant documentation.

Uncomplicated from the aspect of configuration, importance has been attached to ensuring that these turbines can be quickly assembled and installed by hand. As a result of its robust design, the ANTARIS works with extreme efficiency and not only comes at a highly attractive price in its basic version. Particular attention must be drawn to its excellent start-up behaviour (at wind speeds as low as 2.28 m/s) and very quiet operation (49 dB). This means the system can also be installed in residential areas.

Grid-connected operation requires one Smart!wind 7.5 with characteristics matched to the ANTARIS and local wind conditions. Alternatively, in less windy areas, grid-connected operation is also possible with one Smart!wind 5.5.
The inverters carry an appropriate declaration of conformity and are approved for grid-connected operation – the ENS (electronic grid guard system) is already integrated!

When the ANTARIS is used in heating applications, a control cabinet with control electronics provides optimum control of the wind characteristic in conjunction with a 6000-watt heating element.

Read more ...

- For locations exposed to storm-force winds, optionally with different rotor diameters 5.30m - 6.50 m.

- Low noise blade tip profile

- Grid connected, Heating system and Battery charging

- Storm protection with Helicopter position and electronic brake

- Easy to install

Information about ANTARIS Wind Energy System

The ANTARIS wind turbine is a wind energy system that is ideally suited to inland sites. It is designed specifically for feeding power into the grid, charging batteries (24 VDC / 48 VDC etc.) and for supporting heating systems.

As a result of its sturdy design, the ANTARIS is also suitable for locations exposed to storm- force winds, optionally with different rotor diameters (5.30 m – 6,50 m).

The hand-laminated rotor blades benefit from a computer-designed aerodynamic profile. Needless to say, each blade is statically and dynamically balanced, carries an identification number and comes with relevant documentation.

Uncomplicated from the aspect of configuration, importance has been attached to ensuring that these turbines can be quickly assembled and installed by hand. As a result of its robust design, the ANTARIS works with extreme efficiency and not only comes at a highly attractive price in its basic version. Particular attention must be drawn to its excellent start-up behavior (at wind speeds as low as 2.2 m/s) and very quiet operation (49 dB). This means the system can also be installed in residential areas.

Grid-connected operation requires one 3-phased Inverter Smart!wind 10.0 kW with characteristics matched to the ANTARIS and local wind conditions. Alternatively, in less windy areas, grid-connected operation is also possible with one Smart!wind 7.5 kW.

The inverters carry an appropriate declaration of conformity and are approved for grid- connected operation – the ENS (electronic grid guard system) is already integrated!
When the ANTARIS is used in heating applications, a control cabinet with control electronics provides optimum control of the wind characteristic in conjunction with a 6000-watt heating
element.

Read more ...